How to Setup TP Link TD-W8968 (Manual Procedure)
3) Under the Wan Settings Page --> Enter your desired credentials --> VPI needs to be 0 and VCI needs to be 32 (For MTNL Users) Also, Enter the Username as your MTNL Telephone No & Password can either be the CA No or the one you changed.
4) Click on the Advance option beneath the Wan service setup & you would have to enter the required details.
Service Name : MTNL
MTU : 1492
Click on Save & you are ready to go... :)
5) After having followed all these steps, Kindly go to the System Tools tab located in the left side bar.. & do a manual Reboot.
6) Thats all ! You are ready to use your internet now :)
Lets now learn, how to setup your existing connection on Bridge Mode using the same ADSL Modem.
1. Login in to the Router Page & Go to Wan Settings --> Add a New Connection (As showed in the Step 2)
2. Change the Connection Type to Bridge under Wan Service Setup & Enter VPI as 0 & VCI as 32
3. Thats all, You are now ready with the Bridge Mode.
As, We have set up our bridge mode, We now need to create a new dialer in our computer which helps us to connect to the internet.. You need to use the dialer every time you connect to the internet.
This is how you do it :)
Setting up of Dialer
1) Go to Control Panel --> Click on Network & Internet --> Click on View Network status & tasks --> When you go below, You have an option of Setting up of a new connection or network. Click on it.
2) Select Connect to the internet option & click on Next.
3) If you are already connected to the Internet, It will ask you back if you need to create a New Connection. In that case, You need to click on Setup connection anyway
4) In the next step, It will again ask you, If you want to create a New connection or choose the existing one.. Click on No, Create a new connection & proceed.
5) Now, the next step would be the way to connect to the internet.. Click on the one which is displayed Broadband (PPPoe) - That requires a username & password & proceed further.
6) Enter your credentials, Username : MTNL Phone No , Password : Your CA No or custom password & also provide a desired Connection name.
7. Your connection is up now and you just need to go Network Connections --> Right Click the connection you just created (Check the name) and a new shortcut should be placed in your desktop.
8. Thats all ! You just need to click the connection on the desktop & hit connect..
Voila ! You are connected to the internet via Bridge Mode :)
Service Name : MTNL
MTU : 1492
Click on Save & you are ready to go... :)
5) After having followed all these steps, Kindly go to the System Tools tab located in the left side bar.. & do a manual Reboot.
6) Thats all ! You are ready to use your internet now :)
Lets now learn, how to setup your existing connection on Bridge Mode using the same ADSL Modem.
1. Login in to the Router Page & Go to Wan Settings --> Add a New Connection (As showed in the Step 2)
2. Change the Connection Type to Bridge under Wan Service Setup & Enter VPI as 0 & VCI as 32
3. Thats all, You are now ready with the Bridge Mode.
As, We have set up our bridge mode, We now need to create a new dialer in our computer which helps us to connect to the internet.. You need to use the dialer every time you connect to the internet.
This is how you do it :)
Setting up of Dialer
1) Go to Control Panel --> Click on Network & Internet --> Click on View Network status & tasks --> When you go below, You have an option of Setting up of a new connection or network. Click on it.
2) Select Connect to the internet option & click on Next.
3) If you are already connected to the Internet, It will ask you back if you need to create a New Connection. In that case, You need to click on Setup connection anyway
4) In the next step, It will again ask you, If you want to create a New connection or choose the existing one.. Click on No, Create a new connection & proceed.
5) Now, the next step would be the way to connect to the internet.. Click on the one which is displayed Broadband (PPPoe) - That requires a username & password & proceed further.
6) Enter your credentials, Username : MTNL Phone No , Password : Your CA No or custom password & also provide a desired Connection name.
7. Your connection is up now and you just need to go Network Connections --> Right Click the connection you just created (Check the name) and a new shortcut should be placed in your desktop.
8. Thats all ! You just need to click the connection on the desktop & hit connect..
Voila ! You are connected to the internet via Bridge Mode :)
